We supply plumbing and sanitary components for controlled potable-water connections and low-pressure sanitary discharge across domestic and light-commercial networks. This category supports the connection, isolation, flushing, and waste-discharge layers that keep plumbing systems operating as intended.
We supply flush and fill valves for controlling cistern refill and discharge on WC installations. These components are used to ensure reliable flushing performance and consistent water level control across domestic and light-commercial plumbing systems.
Applications
Examples include:
WC flushing systems
Concealed cistern installations
Cold water service feeds to sanitary systems
Supply Support
Core flush and fill valve internals are held in stock across leading brands, with additional variants and specialist components available to order.
Bottom-entry and side-entry fill valves in 3/8" and 1/2" connections
Dual-flush and single-flush outlet valves and siphons
Adjustable-height fill valves for varying cistern sizes
Push-button, cable-operated, and lever flush mechanisms
Replacement cistern internals from Thomas Dudley, Fluidmaster, and Viva Sanitary
Typical sizes / options
Inlet connection sizes 3/8" and 1/2" from stock
Fill valve options for bottom-entry and side-entry cisterns
Flush valve formats to suit concealed and modern cistern systems
Adjustable and compact designs for retrofit and replacement work
Specs / standards
WRAS-approved valve options suitable for potable water supply
Designed for use on mains-fed cold water cistern systems
Adjustable fill levels and float operation depending on valve type
Flush volumes and operation formats vary depending on cistern configuration
Availability & warranty
Common flush and fill valve internals are available from stock across leading brands. Specialist valves and less common configurations are supplied to order.
Warranty: Manufacturer warranty applies across all cistern valve products, subject to product type and installation conditions.
Tap Connectors & Flexibles
We supply flexible tap connectors and hoses for final water service connections where ease of installation, alignment flexibility, and vibration resistance are required. These are used to connect taps, appliances, and outlets to hot and cold water supplies in domestic and light-commercial systems.
Applications
Examples include:
Tap and basin connections
Monobloc tap installations
Washing machine and appliance connections
Hot and cold water service branches
Supply Support
Core flexible connector sizes and lengths are held in stock, with extended lengths and specialist connections available to order.
Flexible braided tap connectors for hot and cold water services
Monobloc tap tails with M10 and M12 connections
Isolating and non-isolating flexible hose variants
Washing machine hoses (red and blue) for appliance connections
Flexible connectors with compression and threaded end connections
Typical sizes / options
Connection sizes including 15 mm x 1/2", 15 mm x 3/4", 22 mm x 3/4", 15 mm x M10 and 15 mm x M12
Standard hose lengths 150 mm, 300 mm, and 500 mm from stock
Larger lengths available to order
Straight flexible hose configurations for general connection use
Specs / standards
Stainless steel braided outer for durability and flexibility
Rubber or EPDM inner hose suitable for hot and cold water services
WRAS-approved options available depending on product line
Pressure and temperature suitability varies depending on hose construction
Availability & warranty
Common flexible tap connectors and hose lengths are available from stock for routine plumbing installations. Extended lengths and specialist connector types are supplied to order.
Warranty: Manufacturer warranty applies across all flexible connector products, subject to product type and installation conditions.
Plumbers Brassware & Service Valves
We supply plumbers brassware and service valves for isolation, control, and connection across domestic water and gas services. These products are used to provide local shut-off points, control flow, and connect appliances without interrupting the wider system.
Applications
Examples include:
Appliance isolation and connection points
Potable water service branches
External outside tap and draw-off points
Heating and plumbing system isolation
Supply Support
Core brassware and service valve lines are held in stock, with larger sizes and specialist valve types supplied to order.
Straight and angled service valves for local isolation
Bib taps and external draw-off valves
Washing machine valves and appliance connection valves
Stop cocks, gate valves, double check valves, and float valves
Drain cocks, pump valves, and gas isolating valves
Typical sizes / options
Common sizes 15 mm and 22 mm from stock
Threaded connections typically 1/2" and 3/4" BSP
Selected valve types available up to 54 mm depending on product
Larger float valve sizes available up to 2" to order
Specs / standards
Brass and DZR brass valve options available depending on application
Chrome plated service valves available for exposed installations
WRAS-approved options available for potable water systems
Pressure and temperature suitability varies depending on valve type
Availability & warranty
Frequently used brassware and service valve sizes are usually available; specialist patterns and finishes are often order-in lines.
Warranty: Manufacturer warranty applies; terms vary by brassware type and brand.
Basin & Sink Wastes
We supply basin and sink wastes that provide a sealed outlet from sanitary fixtures into gravity waste systems. They are used to control discharge at the fixture point and connect directly into non-pressurised drainage pipework.
Applications
Examples include:
Basin and sink waste discharge
Non-pressurised sanitary discharge
Shower and basin connection points
Domestic and light-commercial sanitary outlets
Supply Support
Core basin and sink waste lines are held in stock, with alternative finishes and specialist variants supplied to order.
Unslotted basin wastes for basins without overflow
Clicker, flip-top, and plug-and-chain waste options
Free-flow and grid wastes for unrestricted discharge
Kitchen sink basket strainer wastes
Typical sizes / options
Basin waste size typically 1 1/4"
Sink waste size typically 1 1/2"
Suitable for installations with or without overflow depending on waste type
Specs / standards
Chrome-plated brass waste bodies for durability and corrosion resistance
Threaded connections for direct installation into standard sanitary outlets
Seal integrity provided via integrated washers and sealing components
Discharge compatibility matched to standard gravity waste pipe systems
Availability & warranty
Common basin and sink waste types are available from stock for routine installation and replacement. Alternative finishes and specialist variants are supplied to order.
Warranty: Manufacturer warranty applies across all waste fittings, subject to product type and installation conditions.
Bath & Shower Wastes
We supply bath and shower wastes that provide a controlled discharge point from fixtures into gravity waste systems. They are used to connect baths and shower trays to non-pressurised drainage pipework, with options suited to both standard and high-flow installations.
Applications
Examples include:
Bath and shower tray drainage connections
Non-pressurised sanitary discharge
High-flow shower installations
Domestic and light-commercial sanitary outlets
Supply Support
Core bath and shower waste lines are held in stock, with extended finish options and specialist variants supplied to order.
Bath waste and overflow assemblies in plug-and-chain and clicker variants
Shower tray wastes in standard, high-flow, and low-profile patterns
Waste assemblies designed for modern tray and bath installations
Typical sizes / options
Bath waste outlet size 1 1/2"
Shower waste outlet size 40 mm
Options available for both standard and high-flow shower applications
Specs / standards
Chrome-plated brass bath wastes for durability and corrosion resistance
Shower wastes available in plastic and metal finishes depending on application
Finish options include chrome, white, black, stainless, brushed brass, brushed bronze, rose gold, black nickel, and gunmetal
Flow-rate performance varies by waste pattern and installation type
Designed for compatibility with standard gravity waste systems
Availability & warranty
Common bath and shower waste types are available from stock for routine installations. Extended finish options and specialist variants are supplied to order.
Warranty: Manufacturer warranty applies across all waste fittings, subject to product type and installation conditions.
