We supply industrial plastic pressure systems for process and mechanical services distribution where corrosion resistance, chemical compatibility, and lower system weight are preferred over steel or copper. These systems sit on process transfer and utility circuits handling cooling, treatment, and non-potable service media.
We supply PVC-U and ABS industrial pressure pipework for systems requiring corrosion resistance and reduced installation weight compared with steel or copper. These systems are commonly specified for process cooling, water treatment, and utility distribution circuits where solvent-weld plastic pressure pipework is required.
Applications
Examples include:
Process cooling water circuits
Water treatment and filtration systems
Corrosion-resistant utility pipework
Non-potable water distribution
Chemical handling systems where compatible with the selected pipe material
Supply Support
Core lines held in stock, extended options sourced with confirmed lead times.
PVC-U and ABS pressure pipe lengths for solvent-weld systems
Imperial and metric pipe systems depending on the pipe material
Solvent cements and system preparation cleaners
Pressure pipe ranges for industrial utility and process circuits
Typical sizes / options
PVC-U imperial pipe stocked from ½″ to 6″ in 3 m and 6 m lengths
PVC-U metric pipe stocked from 20 mm to 63 mm in 5 m lengths
ABS imperial pipe stocked from ½″ to 4″ in 3 m and 6 m lengths
Larger PVC-U imperial sizes up to 10″ and metric sizes up to 500 mm available to order
ABS pipe sizes up to 8″ available to order
Specs / standards
PVC-U pressure pipe manufactured to EN 1452-2
ABS pressure pipe manufactured to BS 5391 Part 1
Pressure ratings are quoted at 20°C and must be derated as temperature increases
PVC-U systems should not be used above 60°C
ABS systems should not be used above 70°C
Solvent-weld jointing used across the relevant pipe system range
Availability & warranty
Common PVC-U and ABS pressure pipe lines are usually available in standard diameters; larger diameters and specific pressure classes are often project order.
Warranty: Manufacturer warranty applies; terms vary by brand, material family, and pressure class.
PVC & ABS Valves & Fittings
We supply PVC-U and ABS industrial pressure valves and fittings used to control flow and change direction on plastic pressure pipe systems. These components are commonly used on cooling, water treatment, and utility pipework where corrosion-resistant plastic systems are specified.
Applications
Examples include:
Process cooling water circuits
Water treatment and filtration systems
Corrosion-resistant utility pipework
Non-potable water distribution
Chemical handling systems where compatible with the pipe material
Supply Support
Core lines held in stock, extended options sourced with confirmed lead times.
PVC and ABS imperial fittings stocked from ½″ to 4″
PVC metric fittings stocked from 20 mm to 63 mm
Larger PVC sizes up to 10″ available to order
Larger metric PVC sizes up to 500 mm available to order
ABS sizes up to 8″ available to order
Specs / standards
ABS products generally manufactured to BS 5391
PVC products generally manufactured to EN 1452
BSP threaded connections aligned with BS 21 / ISO 7
PVC service temperature range typically 0°C to +60°C
ABS service temperature range typically −50°C to +70°C
Availability & warranty
Common pressure fittings and valve patterns are typically available in standard sizes; specialist valve bodies, seal materials, and larger interface components are often project order.
Warranty: Manufacturer warranty applies; terms vary by brand, valve type, and fitting specification.
MDPE Pipe
We supply MDPE pipe for underground service lines and distribution networks where flexible, corrosion-resistant polyethylene pipework is required. Blue MDPE pipe is commonly used for potable water supply systems, while black MDPE is used for non-potable water and utility pipework and yellow MDPE for low-pressure gas distribution.
Applications
Examples include:
Potable water service connections and distribution lines
Underground utility water pipework
Irrigation and agricultural water systems
Buried service pipework for utility networks
Low-pressure gas distribution using yellow MDPE pipe
Supply Support
Core lines held in stock, extended options sourced with confirmed lead times.
Blue and black MDPE pressure pipe options by system requirement
Coil and straight-length formats for utility pressure lines
Pressure class variants for low to medium utility duties
Transition adaptors for threaded and flanged interface points
Typical sizes / options
Common MDPE OD sizes from 20 mm to 180 mm
Frequently specified bands around 25 mm to 90 mm
Larger diameters supplied to project pressure and flow requirements
Specs / standards
Material is polyethylene pressure pipe suitable for non-potable and utility duties
Jointing commonly by compression fittings or electrofusion depending on system
Pressure ratings vary by SDR and are temperature dependent
Chemical compatibility and media limits should be checked to project duty
Availability & warranty
Common MDPE pipe sizes are usually available in coil and selected straight lengths; larger diameters and specific SDR classes are often project order.
Warranty: Manufacturer warranty applies; terms vary by brand, SDR class, and product line.
MDPE Compression Fittings
We supply MDPE compression fittings for water service and utility pipework where reliable mechanical jointing is required without heat or specialist fusion equipment. Our range supports underground water distribution, irrigation, and service connection work using proven compression fitting systems.
Applications
Examples include:
Potable water service connections and distribution lines
Underground utility water pipework
Irrigation and agricultural water systems
Buried service pipework for utility networks
Supply Support
Core lines held in stock, extended options sourced with confirmed lead times.
Couplers, reduced couplers, elbows, tees, and reduced tees
Male and female adaptors, UTCs, and stop ends
Stop taps and service connection fittings
Copper and lead adaptors
Philmac stocked ranges with Plasson available to order
Typical sizes / options
Philmac compression fittings stocked from 20 mm to 63 mm
Larger sizes available to order
Metric to imperial transition options available where required
Core fitting patterns stocked for service and distribution pipework
Specs / standards
Philmac quality to BS EN ISO 9001:2008
Philmac complies with BS 6920 for suitability in contact with potable water
BSP threaded fittings rated to 16 bar up to and including 2″
Sizes above 2″ suitable for 10 bar
Operating temperature range typically −10°C to +25°C
Metric/Imperial pressure rated to 16 bar
50 year+ design life
Availability & warranty
Core sizes held in stock with additional sizes available on fast delivery.
Warranty: Manufacturer warranty applies; terms vary by brand, fitting type, and application.
Electrofusion Fittings
We supply electrofusion fittings for polyethylene pipe systems used in water, gas, and utility distribution networks. Electrofusion systems create a fully fused joint between the fitting and pipe, producing a strong and leak-free connection suitable for buried infrastructure pipework. Black fittings are typically used for water and utility systems, while yellow fittings are used for gas distribution networks.
Applications
Examples include:
Potable water distribution and service connections
Underground utility water pipework
Gas distribution networks using yellow PE systems
Irrigation and agricultural water systems
Repair and modification of polyethylene pipelines
Supply Support
Core lines held in stock, extended options sourced with confirmed lead times.
